a Puck Fire Force Feed trailer parked next to a pond with boom extended into the water. BullDog Hi-Vol TPU large diameter hose is connected to the back and is full. a man is holding an attack fire hose in front of the trailer and spraying water sourced from the FF4500-45 back into the pond it came from. the overlaid title in white reads Puck Fire Product Lineup with a Puck Fire shield in the corner
October 29, 2024

The Puck Fire Product Lineup Has You Covered From Source to Nozzle

The first step in setting up at a fire scene is to establish a water source, but there are many instances where a hydrant is not readily available. These nontraditional fire scenes require a large water source, as well as a system to transport the water across long distances. For wildfires, high rise fires, rural fires, industrial plant fires, natural disasters and more, Puck Fire has a new approach to bring water to the fire.

Pumping from the Source

When a hydrant may not be close enough or have the necessary pressure to put out a large-scale fire, Puck Fire’s Force Feed products, like the trailer or the truck, can park right next to a pond, river, ocean, or other large body of open water. The submersible pump on the end of the boom can be placed in the open water source for quick retrieval with 45 feet of horizontal reach. The Force Feed products can be controlled remotely with the LightSpeed control system. This automated pump control can monitor and adjust engine speeds, open and close valves, and make real-time data-based decisions. Accessible from any connected, web-enabled device, LightSpeed allows you to add another layer of safety without adding more people.

Establishing a Supply Line

The Force Feed trailer and truck have large diameter piping to connect to the supply hose. BullDog’s LDH, such as the Hi-Vol TPU, has a smooth thermoplastic polyurethane finish to reduce friction loss. BullDog hose is also tough enough to withstand harsh ground conditions and high temperatures. When using 7.25” supply hose, up to 2,500 feet can be stored on Puck Fire’s TTR15P hose cart.

This turn table reel has 105° of rotation and a 38 HP engine. Users have full remote control operation and 2.5 MPH ground speed to allow for fast and accurate hose deployment while in motion. During retrieval, the TTR15P is able to level-wind the supply hose from a stationary position, allowing for a safe and efficient reloading for the next deployment. Users don’t need to worry about hose falling off or twisting, as Puck’s patented Arch Guard and domed reel ends keep hose flat and on the reel.

a Puck Fire TTR15P turn table reel hose cart laying hose while in motion

Flowing Water

Closer to the fire scene, a single supply line can quickly become multiple lines with a U.S. Coupling manifold. This manifold connects supply hose to smaller lines, utilizing the high flowrates of the Force Feed truck or trailer to keep the flows going for each line. Two lines can be connected to the Quick Attack truck, a pickup with a modified bed with water and foam capabilities. The Quick Attack can quickly pull up to the fire scene and flow up to 4,000 GPM from its two TFT Monsoon or TFT Master Stream nozzles. The nozzles can be controlled remotely, with 6” pipework and wireless monitors available. The truck also has storage for up to 100’ of 7.25” hose and a 275 or 330 gallon foam tote for direct injection of foam.

Hook up the LDH to your fire engine to distribute the water among handlines. U.S. Coupling ball shut offs and nozzles are built from aircraft grade aluminum and finished with a hard anodizing process to withstand the extreme environments and years of use and abuse on the fire scene. The ball shut offs feature an all-aluminum construction, including a bale handle and an optional pistol grip. Additionally, it has a 1-1/2” diameter internal waterway for unrestricted water flow. Paired with a U.S. Coupling smooth bore tips, users can maximize their water stream reach and penetration of the fire. The fog nozzle tips provide adjustability in water stream shape. The full fog helps heat absorption and a straight stream provides extended reach into the seat of the fire.

five hoses connected to a manifold with a cage on one end to catch the foam pigging ball when it reaches the end of the line, water is rushing out of the cage as the line is cleared

After the Fire is Out

After the fire is out, clean up can also be a long and arduous process. The U.S. Coupling pigging system can help flush out large diameter supply hoses quickly and efficiently. No more breaking down couplers and lifting heavy hose. Your crew can shoot the pigging balls or bullets through the hose with an air compressor and air hose. The cage on the end of the manifold catches the pig when it's run the length of the line. This process drains the water and cleans the hose at the same time. After flushing excess water, the TTR15P can easily retrieve the hose from a stationary position.

Save your crew’s manpower and energy for the most important tasks with Puck Fire equipment and accessories. Find past demonstrations on our Facebook page or YouTube channel, or request a demonstration for your crew. To learn more about how Puck Fire can help your firefighting department, call (712) 655-9200.

logo